Introduction: Creating seamless connections in Solid Surface is an art that requires precision and the right material. Using Acrilove Adhesive, you can achieve visually imperceptible seams thanks to the perfect combination of colors and superior adhesive properties.
Steps to the Perfect Seam.
Surface Preparation: Ensure the edges of the Solid Surface are clean and even. Use denatured alcohol for cleaning.
Color Selection of Adhesive: Using the Acrilove color matching chart, select the adhesive that perfectly matches your Solid Surface.
Applying the Adhesive: Evenly apply Acrilove Adhesive to both edges, using mixing nozzles for even distribution. Pay attention to the continuity of the adhesive line.
Bonding: Firmly connect the pieces and secure them with clamp blocks. Ensure that the seam is even along its entire length.
Adhesive Curing: Wait 45 minutes for the Acrilove Adhesive to set, then carefully remove the clamp blocks.
Final Seam Processing: Use an orbital sander, starting with 80-micron sanding discs, to remove excess glue and perfect the seam.
Important Tips
Before starting, ensure that the edges are straight and clean.
During the process, avoid excessive application of adhesive to prevent weak points in the seam.
Evenly distribute the adhesive along the entire length of the seam to ensure its uniformity.
Conclusion: By following these instructions and using Acrilove Adhesive, you will achieve flawless, visually imperceptible seams in Solid Surface products. Acrilove Adhesive is your choice for professional and quality results.
Commenti